Mixed plastic separation machine

Product Introduction of our Mixed plastic separation machine

Mixed plastic separation machine is for processing the plastic mixture to separated plastics for recycling use. Our mixed plastic separation machine adopts the electrostatic separation method, apply to process the mixed plastics which are difficult to be separated by the density flotation method, such as ABS/PS/PP, PET/PVC, PC/PMM, ABS/HIPS, etc.

Mixed plastic separation machine

Working process of our Mixed plastic separation machine

As the input size will make the big difference for the charge, the uniformity and weight of the feed stock also will affect the separation process. If the feed stock is in a very bad state with big differences, better to be screened into different sizes to get the high separation rate.

So the collected mixed plastic needs to be shredding first, and the waste mixed plastic after the shredding can be cut into particles of 1-2 cm size. Because the plastic itself contains a small amount of moisture, the plastic is dried after it is shredding.

PET & PVC separated from mixed plastic separation machine

The dried plastic can be sorted in a closed high voltage electric field according to different conductivity. The electrical properties generated by the high-voltage electric field attract plastics of different electrical properties. According to the principle that the same electrical properties are mutually exclusive and different electrical properties are attracted to each other, different electrical plastics are completely separated. Our mixed plastic separation machine has very high separation rate, the primary crushing separation rate is higher than 95%, then the secondary electrostatic separation rate can reach to 100%.

If you want to know more information about our mixed plastic separation machine, please feel free to contact us.